Низкосернистая углеродная добавка, графитовые гранулы, графитированный нефтяной кокс, углеродный усилитель
Graphitized petroleum coke can be divided into high temperature graphitization and medium temperature graphitization.
The high-temperature graphitized petroleum coke is the product of the Acheson calcining center, with a temperature of 3000 ℃ above,long-term calcination, complete graphitizaton. It is characterized by high fixed carbon, low gas impurity content, rapid dissolution and high recovery. It s the first choice for ductile cast iron for recarburization.
The medium-temperature graphitized petroleum coke is a thermal insulation layer of Acheson’s high temperature graphitized semi. The calcination temperature is in the range of 1700-2700 ℃.It belongs to medium-temperature graphitized products. Its characteristics as high fixed carbon, fast dissolution, high recovery,and moderate sulfur content(0.20-0.40%),low nitrogen content(800-2000 ppm),which is almost same lubrication and clear drawing like high-temperature graphitized petroleum coke. It can be widely used in recarburization of gray cast iron, which is of high cost-effective.
The medium-temperature graphitized petroleum coke is a thermal insulation layer of Acheson’s high temperature graphitized semi. The calcination temperature is in the range of 1700-2700 ℃.It belongs to medium-temperature graphitized products. Its characteristics as high fixed carbon, fast dissolution, high recovery,and moderate sulfur content(0.20-0.40%),low nitrogen content(800-2000 ppm),which is almost same lubrication and clear drawing like high-temperature graphitized petroleum coke. It can be widely used in recarburization of gray cast iron, which is of high cost-effective.
GPC/Graphitized Petroleum Coke/Artificial Graphite Specifications | ||||
Fixed carbon | Пепел | Volatile matter | Sulfur | Moisture |
98.5%Min | 0.8% Max | 0.7% Max | 0.05% Max | 0.5% Max |
98% Min | 1% Max | 1% Max | 0.3% Max | 0.5% Max |
98% Min | 1% Max | 1% Max | 0.5% Max | 0.5% Max |
Size | 0-0.2mm, 0.2-1mm, 1-5mm, 2-6mm or customized particle size. | |||
